HAVING TROUBLE GETTING THROUGH ON OUR MAIN NUMBER ABOVE?
TRY 502-484-5550 or 0704
YOUR SOURCE FOR
bcs tillers, bcs sickle bars,
bcs lawn mowers, bcs snowblowers,
bcs brush mowers, bcs sweepers,
bcs chipper / shredder bcs attachments & bcs accessories
AND
rotary plows, mini hay balers,
hay rakes, spaders, cultivators,
flail mowers, seeder,
potato digger plow, utility trailers
& more!
PTO Accessories
PTO = Power Take Off (where the implement attaches to the tractor)
QUICK COUPLINGS This popular accessory allows you to change implements on your walk-behind tractor in 30-60 seconds without tools. All they require is occasional light greasing and cleaning, and the quick couplings will save you hours of time and the trouble of replacing worn implement mounting studs and nuts, especially if you have multiple implements you are changing in the same season.
Wheel Accessories
NOTE: All accessory measurements are APPROXIMATE…these items are mostly made in Europe, so original sizes are in Centimeters. We convert them to the closest Inch equivalent.
AXLE EXTENSIONS (sold in pairs) Available in a variety of lengths to customize the track width of your walk-behind tractor. Sizes range from 5” to 16” total extension (2.5 to 8” per side), plus, we now offer adjustable axle extensions with an 20 inch range of adjustment, variable in 2” overall increments.
Other Tractor Accessories
TOW COUPLER Tow coupler (black) attached to Drawbar (orange)
on Grillo walk-behind tractor This accessory hitches to the tractor tow hitch (located just above the PTO mounting on all current models we offer) and terminates in a 1 1/8” solid steel rod protruding away from the tractor, with a hole drilled left-to-right through the rod. This is the accessory used by BCS or Grillo to hook a trailer behind the tractor: the Italian-made trailers have a tongue made out of essentially a pipe with a hole drilled through left-to-right close to the end; this tow coupler simply slides into the pipe/tongue and is locked in place by a pin slid through the holes.
Implement Accessories
TILLER DEPTH CONTROL WHEEL (for Shallow tillage) One of the challenges people face with these high-speed tillers is getting them to till at consistently SHALLOW depths, which is desirable for weed control. We now manufacture this handy little gauge wheel assembly, which inserts into the same little receiver under the tiller hood that the Tiller Transport wheel and Hiller/Furrower mount into. The wheel can be adjusted in two ways: By running the 2 large nuts up or down the threaded rod (requires a 1 1/8” wrench), or by moving the wheel unit up or down on the mounting frame (4 sets of holes, requires qty.
Promo Items
Finally! We’ve worn these hats around the shop for years, but we figured it was about time to offer them to our customers!
Water bottles below as well…gotta stay hydrated!
EARTH TOOLS HATS SOLID / “WINTER” TYPE: Tan/beige with Earth Tools official logo & slogan (Farming with your Feet on the Earth). With Velcro adjustment in rear. Item ET-HAT-SOLID, PRICE: $10
MESH-BACK “SUMMER” TYPE: Tan/beige front with white mesh rear, with Earth Tools official logo & slogan (Farming with your Feet on the Earth).